home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19970326-19970626 / 000124_news@columbia.edu _Wed Apr 23 18:52:16 1997.msg < prev    next >
Internet Message Format  |  2020-01-01  |  2KB

  1. Return-Path: <news@columbia.edu>
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
  3.     by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id SAA22366
  4.     for <kermit.misc@watsun.cc.columbia.edu>; Wed, 23 Apr 1997 18:52:12 -0400 (EDT)
  5. Received: (from news@localhost)
  6.     by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id SAA26533
  7.     for kermit.misc@watsun; Wed, 23 Apr 1997 18:52:11 -0400 (EDT)
  8. Path: news.columbia.edu!panix!news.mathworks.com!uunet!in2.uu.net!208.197.151.4!news.esinet.net!news1.cstone.net!not-for-mail
  9. From: "Jesse Spencer" <spencer@mjsi.com>
  10. Newsgroups: comp.protocols.kermit.misc
  11. Subject: No carrier, after getting connected
  12. Date: 23 Apr 1997 22:43:33 GMT
  13. Organization: MJ Sytems
  14. Lines: 22
  15. Message-ID: <01bc5050$dac0b780$322bcdce@Jspencer>
  16. NNTP-Posting-Host: node17.mjsi.com
  17. X-Newsreader: Microsoft Internet News 4.70.1155
  18. Xref: news.columbia.edu comp.protocols.kermit.misc:6942
  19.  
  20. I am having problem with no carrier messages from Kermit. When dialing with
  21. Kermit from a VAX or ALPHA running VMS 6.1 to the same I keep getting no
  22. carrier. I have upgraded to version 6. but that has not helped. This only
  23. occurs when dialing from a U.S. Robotics 28.8 or 33.6 to a 28.8/33.6. If
  24. either the modem dialed into is a 14.4 or out of  is a 14.4 there is
  25. noproblem. The modems connect and if I set dial display on, I can see it
  26. actually gets a username, but then it just sits there try to negotiate
  27. something and returns a no carrier message to the screen with a modem
  28. message: "No Connection." The serial port rate is 19200 and the settings on
  29. the modems are identical. I have tried setting carrier off, on and auto,
  30. setting the speed and leaving it auto, flow control every option, nothing
  31. has helped. If I connect to the modem and just use dial commands, I can
  32. connect 28.8 to 28.8 without a problem. Most of this has been using version
  33. 5 but as I have said I upgraded with no success. I would greatly appreciate
  34. any input. I have also tried setting the modem hayes and usrobotics to no
  35. avail.
  36.  
  37. Any ideas please send mail to:
  38. Spencer@mjsi.com
  39.  
  40. Thanks,
  41. Jesse Spencer